Turbine fan 5015 50x50x15mm 12V or 24V

The 50x50x15mm turbine fan

Turbine fans (or centrifugal fans) have a lower flow capacity than axial fans but allow a much higher pressure difference. It is for these characteristics that turbine fans are used for cooling plastic on extrusion heads. In the various 3D printer upgrades that are available, they are widely used in pairs. You can find 3D models using 50x50x15mm turbine fans on thingiverse. 12V or 24V power supply with 12cm cable and 2-pin JST-XH socket with 2.54mm pitch.

Characteristics of the 50x50x15mm 12V turbine fan:

• Supply voltage: 12V
  
• Supply current: 0.28A
  
• Power consumption: 3.36W
  
• Speed: 6800 +/- 10% rpm
  
• Volume flow: 6.35 CFM / 10.5 m3/h
  
• Noise level: 48.6 dB
  

Fan specifications turbine 50x50x15mm 24V:

• Supply voltage: 24V
  
• Supply current: 0.09A
  
• Power consumption: 2.16W
  
• Speed: 5300 +/- 10% rpm
  
• Volume flow: 4.35 CFM / 7.3 m3/h
  
• Noise level: 39.8 dB
  

I3D Service / 3D Printers

I3D Service selects quality items for your 3D printers. You will easily find the item of your choice in our product ranges: mechanical and electronic spare parts, extruder heads and extruders, as well as 3D printing plates and accessories. Don't hesitate to contact us if you need advice or are looking for specific products. I3D Service contact us: your 3D printing partner!